Bath Towel Robe Tutorial
I recently found the perfect bath towel robe tutorial and I’m excited to share it with you! This robe is so soft and cuddly, you’ll never want to take it off! It’s also absorbent and quick-drying, making it the perfect choice for after a shower or bath.
The best part is that it’s easy to make, even if you’ve never sewn before. Follow the steps below and you’ll have your very own bath towel robe in no time!
Looking for a cozy and unique way to keep warm this winter? Check out this bath towel robe tutorial! This project is simple enough for even the most novice of sewers, and the results are sure to please.
Start by cutting two rectangles out of your chosen fabric. The dimensions will depend on how large you want your finished robe to be, but a good starting point is 20” x 36”. Next, fold each rectangle in half lengthwise and stitch along the long side and one short side, leaving an opening at the fold for turning.
Turn your fabric right side out and press the seams flat. Topstitch around all four edges of each rectangle to finish them off.Now it’s time to put your robe together!
Place both rectangles wrong sides together, aligning the raw edges. Stitch along both long sides and one short side, again leaving an opening for turning. Turn your robe right side out through this opening, press the seams flat, and topstitch around all four edges.
Finally, thread a belt through the openings at each end of your robe and voila! You’re ready to snuggle up in style.
How Do You Make a Towel Bathrobe?
Assuming you would like a tutorial on how to turn a towel into a bathrobe:You will need:
-1 large bath towel
-1 hand towel
-Thread and needle or sewing machine
-Scissors
Instructions:
1. Fold the large bath towel in half vertically. Make sure the fold is at the top of the towel.
If not, refold it until it is.
2. Spread out the folded towel so that the selvage edges (the finished long sides of fabric) are on either side and the raw cut ends are at the top and bottom. The folded edge should still be at the top.
3. Pin along both selvage edges, making sure to catch all four layers of fabric. Leave about 3” un pinned at each end for seam allowance. You may want to put several pins in each section to keep everything together while you sew it later on.
Be especially careful not to let any folds form along these edges as you pin them since those will show up in your final product! If necessary, baste (hand sew) these layers together before continuing with step 4 to avoid this problem altogether.
4. Sew along both selvage edges using a ½” seam allowance.
* If you have a serger, use that instead for neater edges that won’t unravel over time (just make sure your thread matches your fabric). Again, leave about 3” unsewn at each end for seam allowance/hemming later on. 5 Trim away any loose threads from your newly sewn seams then open up your robe so that wrong sides are facing out and press flat with an iron if desired/needed—especially if you hand basted earlier on!Now that your main body piece is done, it’s time to add some sleeves!
How Do You Make a Bath Robe?
Assuming you would like a step-by-step guide on how to make a bath robe:1. Gather your supplies. You will need 2 yards of terry cloth, scissors, a measuring tape, and thread.
2. Cut the fabric in half lengthwise.
3. Fold each piece of fabric in half widthwise and cut out the neckline curve. Unfold the fabric and you should now have two curved pieces that look like this:
4. Pin the two pieces of fabric together at the shoulders and sideseams. Sew these seams with a sewing machine or by hand using a whipstitch.
5) Turn the robe right side out and try it on!
If it is too big or small, adjust the seams accordingly and re-sew them shut. Now is also a good time to hem the sleeves and bottom of the robe if desired.
How Do You Make a Robe Without a Pattern?
Assuming you would like a step-by-step guide on how to make a robe without using a pattern:
1. Choose your fabric. A soft, lightweight fabric is best for a robe.Cotton, linen, and silk are all good choices. Avoid heavyweight fabrics like denim or corduroy.2. Cut two rectangles of fabric, one for the front and one for the back of the robe.
The front rectangle should be about 1/3 wider than the back rectangle.3. Sew the shoulder seams by folding each piece of fabric in half lengthwise and sewing along the raw edge with a straight stitch.4. Finish the raw edges of the neckline and armholes with bias tape or by serging them (a type of stitching that prevents fraying).
5. Sew the side seams together, matching up the raw edges and sewing with a straight stitch until you reach about 3/4 down from the top of the robe on each side seam. At this point, you will need to leave an opening in order for you to be able to put the robe on later. To do this, simply backstitch at each end of the opening so that your stitches don’t come undone when you put stress on them later while putting on the robe .
Then finish sewing each side seam until you reach bottom hemline of garment 6 . 7 Hem your garment by folding up 1/2 inch of fabric at bottom edge and then another 1/2 inch and sewing close to inner folded edge With either a straight stitch or zigzag stitch 8 Fold up sleeve hems 1/2 inch twice And sew close to innermost fold 9 Put ribbon through eyelets At center front if desired For closure Or use Velcro 10 Try on your new garment!
How Do You Use a Towel Robe?
Assuming you would like tips on how to use a towel robe:Towel robes are great for after a shower or bath, when you want to relax without getting fully dressed. Here are some tips on how to use a towel robe:
-Wrap the towel robe around your body, making sure that it is snug but not too tight.
-Tie the belt or sash around your waist.
-If the towelrobe has sleeves, make sure they are not hanging down too far and getting in the way.
-Now you can enjoy your relaxing time in your comfortable towel robe!
DIY Home bathrobe without a pattern, quickly and easily! Video tutorial.
Robes Made from Bath Towels
The average bath towel is made of 100% cotton. However, there are other types of materials that can be used to make a bathrobe, such as bamboo or microfiber.Bathrobes are usually made from terrycloth, which is a type of fabric that is absorbent and dries quickly.
Terrycloth is often used for towels because it is effective at absorbing water. However, robes made from other materials, such as bamboo or microfiber, can also be absorbent and dry quickly.Bamboo robes are environmentally friendly because bamboo is a sustainable resource.
Bamboo grows quickly and does not require the use of pesticides or fertilizers. Microfiber robes are also quick-drying and can be laundered in the washing machine.When choosing a bathrobe, consider the material it is made from and how it will feel on your skin.
A robe made from 100% cotton will be soft and absorbent. A robe made from bamboo or microfiber will also be soft but may not absorb water as well as a cotton robe.
Bath Robe
There’s nothing quite like slipping into a soft, cozy bathrobe after a relaxing shower or soak in the tub. Whether you’re looking for something to keep you warm on chilly mornings or simply want a comfortable option for lounging around the house, a bath robe is always a good choice. But with so many different styles and materials to choose from, how do you know which one is right for you?
Keep reading to learn everything you need to know about bathrobes before making your purchase.
Terry cloth is made from looped yarns that are sheared on one side, resulting in a fluffy and absorbent fabric that’s perfect for post-bath drying off. If you live in a cold climate or often find yourself reaching for a blanket when relaxing at home, velour or fleece are also great options as they provide extra warmth without being too heavy.As far as style goes, there are two main types of bathrobes – kimonos and shawls.
Kimono robes have wide sleeves and wrap around the body like traditional Japanese garments, while shawl robes have narrower sleeves and typically tie at the waist. Both styles can be found in short (knee-length) or long (ankle-length) lengths, so it’s really up to personal preference which route you go. And don’t forget about hooded robes if you’re looking for even more coverage!
Finally, consider any special features that might be important to you when selecting a bathrobe. Some robes come equipped with pockets (great for holding your phone or TV remote), while others have built-in belts or loops for hanging up after use. You can even find options with fun designs or embellishments like embroidery or fringe detailing if you want something extra special.
Whatever your needs may be, there’s sure to be a bathrobe out there that’s perfect for you – happy shopping!
Bath Robe Pattern
Bath Robe PatternA bath robe is a great way to keep warm after a shower or bath. They are also very absorbent, making them ideal for drying off your body.
A bath robe can be made from many different materials, but the most common is terry cloth. This type of fabric is very absorbent and will dry you off quickly. It is also important to choose a material that is comfortable to wear.
Some people prefer cotton bath robes because they are softer and more comfortable than other materials.When choosing a pattern for your bath robe, there are many things to consider. The first thing you need to think about is the size of the robe.
You will need to measure yourself so that you can find a pattern that fits you well. It is also important to think about the style of the robe. Do you want a longrobe or a shorter one?
There are many different styles of robes available, so it should not be difficult to find one that you like.Another thing to consider when choosing a bathrobe pattern is the type of closure you want on the robe. Some people prefer Velcro closures because they are easy to use and take off.
Others prefer buttons or ties because they provide a more secure closure. Once you have decided on the style and closure of your bathrobe, it should be easy to find a pattern that meets your needs.
How to Make a Towel Poncho for Adults
Whether you’re headed to the beach or the pool, a towel poncho is a must-have for anyone who loves spending time outdoors. But why settle for a boring old store-bought poncho when you can easily make your own? With just a few supplies and some simple sewing skills, you can create a unique towel poncho that’s sure to turn heads.
To get started, you’ll need two large bath towels, a yard of Velcro, and a sewing machine. First, lay one of the towels flat on a surface and fold it in half lengthwise. Then, cut the towel along the fold to create two long rectangles.
Next, take one of the rectangles and fold it in half again lengthwise. Sew along the long side and one end to create a tube. Repeat this step with the other rectangle.
Now it’s time to put everything together. Slip one towel tube over your head so that it rests on your shoulders like a cape. Then take the other tube and drape it over your first tube so that the two ends meet in front of you.
Use Velcro strips to secure the overlapping fabric in place. And that’s it!
How to Make a Child’S Robe from a Towel
Assuming you would like a blog titled “How to Make a Child’s Robe from a Towel”:Making a child’s robe from a towel is an easy and fun project that can be done in about an hour. You’ll need two towels, a sewing machine, and some thread.
The first step is to fold one of the towels in half lengthwise and sew the side seam. Then, turn the towel right side out and sew the other side seam. Next, fold the second towel in half widthwise and sew the side seam.
This will create a pocket for the child’s head to go through. Now, take both towels and put them wrong sides together. Sew around the edge of the robes, leaving an opening for the arms.
Finally, turn the robe right side out and hem the sleeves and bottom edge. Your child’s new robe is now ready to wear!
How to Make a Robe Without Sewing
When it comes to robes, there are a lot of different ways that you can make them. You can sew them, knit them, or even Crochet them. But what if you don’t know how to do any of those things?
Well, don’t worry, because you can still make a robe without sewing!The first thing you’ll need to do is find a fabric that you like. It doesn’t necessarily have to be a robe-specific fabric, but it should be something that’s comfortable and not too heavy.
Once you’ve found the perfect fabric, cut it into two pieces that are about shoulder-width and long enough to reach your ankles.Now it’s time to put the pieces together. You can either use a hot glue gun or some double-sided tape to attach the two pieces together.
Once they’re attached, try on your new robe and adjust the fit as necessary. If everything looks good, congratulations! You’ve just made yourself a brand new robe without having to sew a single stitch!
How to Sew a Robe With a Hood
If you’re looking to add a touch of luxury to your loungewear, sewing a robe with a hood is the way to go. While it may seem like a daunting task, we promise it’s not as difficult as it looks. With our step-by-step guide, you’ll have your new robe finished in no time.
First things first: gather your supplies. You’ll need 1-1/2 yards of 60″ wide fabric, a matching thread, and a yard of ribbon for the ties. We recommend using a lightweight fabric such as cotton or linen for this project.
Once you have your materials, cut out two rectangles from the fabric measuring 33″ x 60″. These will be the front and back panels of your robe. Then, cut two 7″ x 60″ strips for the side seams and two 18″ x 60″ strips for the sleeves.
To construct the robe, start by sewing the side seams together using a French seam (this will give your garment a professional finish). Next, sew the sleeve seams and attach them to the body of the robe. Finally, hem all four edges of the robe – we recommend using a rolled hem for an extra touch of refinement.
Now comes the fun part: adding the hood! Cut out two semicircles from your remaining fabric measuring 18″ in diameter at their widest point. Sew these together along their curved edge to form one continuous hood piece.
Then simply sew this piece onto the back neckline of your robe. And that’s it!
How to Make a Robe Out of a Sheet
Are you looking for a comfy, cozy robe to lounge around the house in? If so, why not make your own out of a soft sheet? It’s easy to do and only requires a few materials.
Here’s what you’ll need:1 queen or king size sheet
2 yards of ribbon or cord
Scissors
Sewing machine (optional)First, wash and dry your sheet.
Then, fold it in half lengthwise. Cut off any excess fabric, leaving you with a long rectangle. Next, fold the rectangle in half again width-wise.
You should now have a long, narrow strip of fabric.
At one end of the strip, cut a small hole for your head to fit through. Then, cut two armholes on either side of the head hole.
Once that’s done, hem all the raw edges of the fabric to prevent fraying. If you’re using a sewing machine, simply sew a straight stitch around all the edges; if not, you can hand-sew or use an iron-on adhesive tape.
Now it’s time to turn your flat piece of fabric into a robe!
To do this, first thread your ribbon or cord through the head hole and tie it off at one end. Then put the robe on like you would any other garment; slip your arms through the armholes and tie the cord around your waist. That’s it!
Conclusion
This tutorial will show you how to make a bath towel robe. You will need two towels, a sewing machine, and some other supplies. The first step is to cut the towels in half.
Then, sew the halves together along the long edge. Next, fold the top down about an inch or so and hem it. Finally, add some ties or belt loops to keep the robe closed.
