Assuming you would like a tutorial on how to make an apron out of a bath towel:
You will need: 1 bath towel, 1 hand towel, scissors, and sewing supplies. First, fold the bath towel in half width-wise and lay it flat.
Then, do the same with the hand towel. Place the hand towel at the top of the bath towel, making sure that the folded edges of both towels are lined up. Next, cut a half-circle out of the bottom of the towels (this will be your neck hole).
Once you have done that, cut two 26-inch long strips from each side of your aprons (these will be your ties). To finish, sew around all the edges of your apron, leaving about an inch or so unsewn at the top of each tie so that you can thread them through later. And there you have it—a simple yet stylish apron made from just two towels!
- Cut a bath towel in half width-wise
- Fold one of the halves in half length-wise and sew the two raw edges together with a sewing machine or by hand to create a long, thin strip
- Tie the strip around your neck, making sure that the towel hangs down evenly in the back
- Take the other half of the towel and fold it in half width-wise, then sew the two raw edges together to create another long, thin strip
- Tie this strip around your waist, again making sure that the towel hangs down evenly all around
How Do You Attach a Towel to an Apron?
Assuming you would like tips on how to keep your towel attached to your apron while cooking:
One way to do this is by using a ring clip. You can purchase these online or at most kitchen stores.
To use, simply attach the ring clip to your apron strings and then loop your towel through the ring. This will allow you to quickly grab the towel when needed without having to take off your apron. Another option is to safety pin the towel onto your apron.
This method works well if you have a smaller towel that you want to keep close by. Simply fold over the top of the towel and pin it onto your apron strings or fabric. If you have an oven door handle in reach while cooking, you can also drape your towel over the handle.
This keeps it within easy reach and prevents it from getting dirty on the countertop. Just make sure that the handle is cool before grabbing it!
How Do I Make an Apron?
Assuming you would like a tutorial on how to make a basic apron:
You will need:
-1/2 yard light to medium weight cotton fabric (quilting cotton works great)
-1/4 yard contrast fabric for waistband, necktie and pocket (optional) -matching thread -scissors
-ruler or measuring tape -pins or clips -sewing machine
Instructions: 1. Cut out your pattern pieces. You will need 2 rectangles for the body of the apron (14″x20″ each), 1 rectangle for the waistband (4″x22″), 2 strips for the neckties (2″x24″), and 1 pocket piece (6″x8″).
If using contrasting fabrics, cut those pieces from your contrast fabric now.
3. Place both hemmed rectangles right sides together, matching up all 4 sides, and sew around 3 edges with a 1/4 inch seam allowance, leaving the top wide open. 4. Fold over one long side of the Waistband Rectangle 1/4 inch twice and press with an iron to create a crease. Unfold and then fold in half lengthwise so that the raw edges are hidden inside and press again.
Sew close to both raw edges with a straight stitch. Repeat for other long side of Waistband Rectangle. 5a). To make gathered straps, thread a hand sewing needle with doubled thread and knot one end securely. Starting at one short end of one Necktie Strip, insert needle into folded edge and pull through until only about 6 inches of thread remain on needle side; do not cut off excess thread yet! Holding strip between thumb and first 2 fingers of other hand, gently pull on working end of thread while pushing down on folded edge with thumb to form gathers; stop when strip is about half its original width.* Knot working thread several times along gathers to secure; trim off excess threads.* Repeat from *to* on other short end of strip and remaining Necktie Strip . Set aside until Step 9b). 5b).
How Do You Make a School Apron?
Assuming you would like a tutorial on how to make a school apron:
You will need:
-1/2 yard of 100% cotton fabric (prewashed) in the pattern or colors of your choice
-Matching thread -Scissors -Pins
-Iron and ironing board -Sewing machine Instructions:
1. Cut out two rectangles of fabric measuring 19″ wide by 22″ long. These are the front and back panels of the apron. If you are using a directional print, be sure to place the pieces so they will face the correct direction when sewn together.
2. On each rectangle, fold down one long side 1/4″, wrong sides together, and press with an iron. Then fold it over again 1″, wrong sides together, and press again. This forms a clean finished edge on both long sides of each rectangle. Repeat for the other three raw edges of both rectangles to finish all four edges neatly.
Now you should have two pieces that look like this: 3. To make the neck strap, cut out a strip of fabric 2″ wide by 24″ long. Fold this in half lengthwise, wrong sides together, matching up all four raw edges evenly.
Press with an iron then open up the tube so that it lies flat. Fold each long side inward towards the center crease line thenpress flat again with iron . Sew along both long sides with a 1/4″ seam allowance, leaving about 4” unsewn at each end for turning later Your strip should now look like this when opened up flat:
How Do You Make a Towel Out of a Baby Doll?
Assuming you want to make a baby doll towel:
You will need:
-1/4 yard terry cloth or similar fabric (you can use an old hand towel)
-sewing machine and thread -scissors -a baby doll about 15″ long
First, cut a rectangle of fabric that is twice the width of your baby doll and about 18″ long. Fold the fabric in half lengthwise with wrong sides together and press. Sew along the long edge with a 1/2″ seam allowance, then turn the tube right side out and press again. Next, fold one end of the tube over about 1″ to form a cuff and sew it in place. Now, slide your baby doll inside the tube so that her head pops out of the top opening. Fold the raw edge of the remaining open end down about 1/2″, then sew it closed. You’ve now got a cute little hooded towel for your baby doll!
How to Make an Easy Bath towel Apron
Bath Towel Apron Pattern
This bath towel apron pattern is so easy and quick to sew! It’s the perfect way to use up those extra bath towels that you have hanging around. And it makes a great gift for any occasion!
What you’ll need: -1 bath towel -1/2 yard of coordinating fabric (I used cotton)
-thread -sewing machine Instructions:
1. Start by folding your bath towel in half lengthwise. Then, cut off the top band (the part with the logo or design). You should now have a big rectangle of towel.
2. Fold your fabric in half lengthwise, right sides together. Pin along one long side and sew with a 1/2″ seam allowance. Leave a 3″ gap in the middle for turning.
3 3. Trim away the excess fabric from the corners, then turn right side out and press flat. Sew up the opening using a ladder stitch or your machine’s invisible stitch setting. 4 4 .
Now it’s time to attach the waistband! With right sides together, pin one raw edge of the waistband to one raw edge of the skirt . Sew all around with a 1/2″ seam allowance, then turn right side out and press flat again . Tuck in the raw edges of both layers at the open end of the waistband , then pin closed . Sew shut using an invisible stitch or ladder stitch .
Apron With Towel Attached
An apron with a towel attached is the perfect way to keep your hands free while cooking or cleaning. The towel can be used to dry your hands, wipe up spills, or even hold hot pots and pans. This type of apron is also great for keeping your clothes clean while working in the kitchen.
Towel Apron for Baby Bath
If you’re looking for a way to make bath time a little more fun (and a lot less messy), then you need a towel apron for your baby! This simple and easy-to-use product attaches to your child’s neck with Velcro, and has two long “tails” that hang down in front. Just put your baby in the tub, slip on the apron, and voila – instant cuteness!
Not only is the towel apron super cute, it’s also functional. The long tails help keep soap and water off of your child’s clothes, and they can even be used as makeshift washcloths. Plus, when it’s time to get out of the tub, the apron helps keep your baby warm while you dry them off.
So if you’re looking for a way to make bath time more fun (and less messy), consider investing in a towel apron for your little one!
Dish Towel Aprons for Adults
Dish towel aprons are a great way to add a bit of personality to your kitchen. They’re also functional, keeping your clothes clean while you cook. Here are some tips for choosing the perfect dish towel apron for your needs.
First, consider the size of the apron. If you’re tall, you may want an extra-long apron that covers more of your front. If you have a lot of dishes to wash, look for an apron with multiple pockets for holding scrub brushes and other cleaning supplies.
Next, think about the style of the apron. Do you want something frilly and girly? Or do you prefer a more utilitarian design?
There are lots of options out there, so take some time to browse until you find the perfect one for your kitchen. Finally, don’t forget about the fabric! Cotton is always a good choice for dish towels since it’s absorbent and durable.
But if you want something with more personality, look for prints or patterns in fun colors or materials like denim or canvas.
Whether you’re a beginner or a sewing pro, this easy-to-follow tutorial will show you how to make an apron out of a bath towel in just minutes. All you need is a bath towel, some scissors, and some thread. First, fold the towel in half lengthwise.
Then, cut off the selvage edges (the finished edges that keep towels from unraveling). Next, cut two armholes into the side seams of the towel. Finally, hem the raw edges and waistband to finish your new apron!