Bath towel aprons are a practical and stylish way to keep your clothes clean and dry while you work in the kitchen. They also make great gifts! This tutorial will show you how to make a bath towel apron in just a few simple steps.
Making your own bath towel apron is a great way to save money and have a unique, stylish accessory for your bathroom. This tutorial will show you how to make a simple, yet chic, apron from an ordinary bath towel. You’ll need just a few supplies and some basic sewing skills to create this project.
Best of all, it’s a quick and easy project that you can finish in an afternoon.
How Do You Make an Apron Out of a Bath Towel?
Assuming you would like a tutorial on how to make an apron out of a bath towel:
You will need:
-1 bath towel
-1 hand towel -needle and thread or sewing machine -scissors
-pins Optional: ribbon, lace, or other decorative trim (no wider than the bath towel) First, fold the bath towel in half widthwise.
If the design on your towel is patterned, be sure to line up the edges so that the pattern is symmetrical when folded. Next, take the hand towel and do the same thing. Now you should have two long rectangles, one twice as wide as the other.
Using scissors, cut about 3” off each short end of both towels. Save these scraps for later; we will use them to make straps. On one long side of each rectangle, make a small cut (~ 1”) at the center.
This cut will help ensure that your head and neck can fit through easily once we start wearing it like an apron. Now it’s time to start sewing! If you are using a needle and thread, you can either do a simple running stitch or a zigzag stitch along the raw (short) edges of both rectangles.
If you have access to a sewing machine, feel free to use that instead – any basic straight stitch will work just fine. Just be sure to leave about ½” seam allowance on all sides so that everything stays nice and secure. Once you have finished stitching along all four short edges, it’s time to hem the long sides. Again, use either a needle and thread or your sewing machine; whichever you are more comfortable with is perfectly fine. Once again, remember to leave about ½” seam allowance on all sides.
How Do You Attach a Towel to an Apron?
Assuming you would like tips on how to attach a towel to an apron:
One way to do this is by using fabric tape. Place the strip of tape along the top edge of the towel, and then adhere it to the underside of the apron’s top edge.
Another way is to sew a loop onto the top corner of the towel using thread that matches the towel’s color. Once you’ve made the loop, slip it over one of the aprons strings before knotting it in place.
How Do You Make a Towel Out of a Baby Doll?
Assuming you would like instructions on how to make a doll sized towel:
You will need:
-A baby Doll
-A square piece of fabric (preferably terry cloth) -Scissors -Thread
-Pins -Needle -Sewing Machine (optional)
1. Cut the fabric into a rectangle shape that will be able to wrap around the doll with some excess. The excess is important as it will allow you to create a seam. 2. Fold the long sides of the rectangles inwards so they meet in the middle and pin them together.
3. Sew along the pinned edges, removing the pins as you go. If you do not have access to a sewing machine, simply hand stitch these side seams together. 4. Now fold over one end of your sewn rectangle about an inch or two down and pin it in place.
This creates what will become the top edge of your hooded towel 5. Sew along this edge leaving a small opening at which point you can turn your towel right side out 6 Finally, hem all four sides of your hooded baby doll towel and voila!
How to Make an Easy Bath towel Apron
How to Sew Baby Bath Apron
Assuming you want a blog post about how to make a baby bath apron:
If you have basic sewing skills, you can easily sew a baby bath apron. You’ll need about 1/2 yard of water-resistant fabric and 1/4 yard of coordinating terrycloth.
Cut two rectangles out of the water-resistant fabric, each measuring 18″x22″. These will be the front and back panels of the apron. Then, cut two strips of terrycloth measuring 2″x18″.
These will be the ties that go around the neck and waist. To assemble the apron, first sew the two rectangles together along the sides and bottom with a 1/4″ seam allowance. Next, fold down the top edge 1/4″ and hem it. Then, take one of the terrycloth strips and place it right side down on one side of the neck opening.
Pin it in place, then sew it to the neck opening with a 1/4″ seam allowance. Do the same for the other side of the neck opening and for both sides ofthe waist opening. Your baby bath apron is now complete!
It’s perfect for keeping your little one clean while they’re enjoying their baths.
Hands Free Baby Towel
A hands free baby towel is an essential tool for any parent trying to keep their little one clean and dry. There are a lot of different ways to use a hands free baby towel, but the most common way is to drape it over your shoulder so that your hands are free to do other things, like holding your baby or getting them dressed.
Some have Velcro closures, while others tie around the neck. Some are made from cotton, while others are made from terry cloth. And some even come with hoods to help keep your baby’s head warm and dry.
No matter which style you choose, a hands free baby towel is a must-have for any parent who wants to make life a little easier.
Kids Bath Towels
Bath towels are an important part of bath time for kids. They help to keep your child clean and dry after a bath or shower. There are many different types and styles of kids bath towels available, so it is important to choose one that is right for your child.
Some things to consider when choosing a kids bath towel include: -Size. Make sure to choose a towel that is the right size for your child.
It should be large enough to wrap around them comfortably, but not too big that it becomes cumbersome. -Material. Bath towels can be made from various materials including cotton, microfiber, and Velcro.
Consider what material will be most comfortable for your child and easy to care for. -Design. Kids bath towels come in a variety of colors and designs.
Choose one that your child will love using and that coordinates with the rest of their bathroom décor.
This is a tutorial for making a bath towel apron. You will need two bath towels, a sewing machine, and some thread. First, fold one of the towels in half lengthwise and sew it together along the long side.
Then, do the same with the other towel. Next, take the two sewn towels and put them right sides together. Sew along the top edge, leaving an opening for turning.
Turn the apron right side out and iron it flat. Lastly, sew up the opening and you’re done!